Advanced Control

-

Comments

Post a Comment

Popular posts from this blog

Introduction: PID Controller Design

-
Image
Introduction: PID Controller Design In this tutorial we will introduce a simple yet versatile feedback compensator structure, the Proportional-Integral-Derivative (PID) controller. We will discuss the effect of each of the pid parameters on the closed-loop dynamics and demonstrate how to use a PID controller to improve the system performance. Key MATLAB commands used in this tutorial are:  tf  ,  step  ,  pid  ,  feedback  ,  pidtool  ,  pidtune In this tutorial, we will consider the following unity feedback system: The output of a PID controller, equal to the control input to the plant, in the time-domain is as follows: (1) First, let's take a look at how the PID controller works in a closed-loop system using the schematic shown above. The variable ( ) represents the tracking error, the difference between the desired input value ( ) and the actual output ( ). This error signal ( ) will be sent to the PID controlle...
Read more

PROFIBUS

-
Image
 PROFIBUS PROFIBUS or Process Field Bus was introduced in 1989 and it is sometimes confused with PROFINET. It links plant automation modules with the process control. PROFIBUS uses a multi drop single cable to connect the devices. This method is cost effective especially for larger sites when compared to old methods. Its installation cost is low and it is easy to find faults as well because it is a single cable. Types of PROFIBUS There are two types or versions of PROFIBUS commonly known as 1.    PROFIBUS DP 2.    PROFIBUS PA Here is a brief introduction to both of these types. PROFIBUS DP It runs over two core screened cable that is violet sheathed and its speed varies from 9.6Kbps to 12Mbps. A particular speed can be chosen for a network to give enough time for communication with all the devices present in the network. If systems change slowly then lower communication speed is suitable and if the systems change quickly then effective ...
Read more

CoDeSys - industrial IEC 61131-3 PLC programming

-
Image
CoDeSys  is the acronym of Controller Development System. It is a development program which enables the user to create visualizations of the operations and processes of the applications. CoDeSys contains an integrated visualization system which is unique and very useful. Its applications of programiming controllers are built according to the International indsutrial standadrs. CodeSys software is easy to install and is freely available from the company’s site. This software enables the operator to draw a visual chart of the controller’s data and can watch and assess the performance easily. No additional tools are required for this software. A manual comes with the software which contains all the information and it has integrated visual program. The credit of developing CoDeSys goes to the software company located in Germany and its most recent version was released by the company in 1994. Five programming languages are used in CoDeSys which enable the programming of diff...
Read more